Blogs
Guides on chemical earthing, material selection, installation and electrical safety.
-
Earthing for Server Rooms, CNC Machines and Sensitive Equipment
Sensitive electronics need a low, steady earth and good bonding. What “clean earth” really means, and the dangerous shortcut to avoid.
-
Earthing for DG Sets, Transformers and Panels in a Factory
How the main power equipment in a factory is earthed: neutral and body earthing, how many pits, and the bonding that ties it all together.
-
Why Earth Resistance Rises in the Dry Season, and What to Do About It
Earth pits that pass in the monsoon can fail by April. Why it happens, which pits suffer most, and how to keep readings steady all year.
-
G.I Strip or Copper Strip: Choosing and Sizing Earthing Conductors
Which conductor to use between equipment and the earth pit, how G.I and copper compare, and what decides the size.
-
Earth Pit Covers: Cast Iron, FRP or a Cover with Chamber?
Why every earth pit needs a proper cover, and how to choose between cast iron, FRP and a cover with its own chamber.
-
ESE or Conventional Lightning Arrester: How to Choose
The two main kinds of lightning air terminal, what each claims, which standards cover them, and how to decide for your building.
-
How Many Bags of Backfill Compound Does an Earth Pit Need?
A simple way to estimate backfill compound for each pit and for a whole project, so you neither run short on site nor over-order.
-
How Earth Resistance Is Tested, Step by Step
How an earth pit is tested, what the reading means, and how to make sure the number you record is one you can trust.
-
Earthing a Rooftop Solar System: What a Safe Installation Needs
A practical guide to earthing rooftop solar: what has to be connected, how many pits, and the shortcuts that cause problems later.
-
Copper Bonded, G.I or Pure Copper Electrode: Cost vs Service Life
Which earthing electrode material to choose for your soil and budget, and why the cheapest option is not always the lowest-cost one.
